Vertical Steam Generators
OVERVIEW
» No Danger of Explosion.
» 92%-94% Efficiency.
» High Quality 99.5% Dry Steam
» Steam is ready to use only in max. 3 minutes after cold start.
» Available at 4-16 bar Working Pressure and Steam Capacity 150 kg/h – 2.000 kg/h*
» PLC controlled. All the value can be tracked via touch panel.
» Very easy to use - Minimum Maintenance Requirement
» Enviromental Friendly
» Gas or Diesel Fired - Dual Fuel also available
ADVANTAGES
HIGH EFFICIENCY
» Due to the FOUR-PASS coil design, not only the heating surface is highly benefited by the flame and flame smoke but also combustion air is heated and this helps to increase the efficiency up to 94%
» High combustion efficiency due to the instant and responsive fuel-air regulation by servo motor.
» Modulated ignition enables steam generator to match your steam load profile while making sure that system steam pressure is maintained.
» ALBA Steam Generator Feed Pumps can pump 105°C feed water continiously without any problem. Therefore, less energy is spent to convert water into the steam phase and efficiency is increased.
» As steam is ready to use only in 3 minutes after cold start, the boiler efficiency is 8% higher than conventional steam boilers.
%100 SAFETY
» No Risk of Explosion due to the spiral coil pipe design. No pressurized steam and water storage.
» No risk for human and enviroment. Safest Design Ever
» All the safety equipment and materials under pressure are certificated and conformity for 97/23/EC Pressure Equipment Directive
» High safety and low weight and low volume design make installation possible in buildings with limited area and limited structural support.
USER FRIENDLY DESIGN
» Takes less space due to the compact design which is helping to reduce construction costs for new facility installations.
» Adjusts capacity automatically - ALBA Steam Generator can be started just by pressing a start button. Remote control is also available upon request.
» All values can be digitally under track.
» PC Integration and data analysis is possible.
» Operational and after sales service costs much lower than other alternative designs due to the minimum maintenance requirement
» Enviromental friendly.
EXCELLENCE IN MANUFACTURING TECHNOLOGY AND HIGH-QUALITY MATERIAL - PERFECT TRACEABILITY
» ALBA Steam Generators are manufactured in modern production facilities with a total area of 50.000m2(approx. 20.000m2 closed area)
» Pressured equipment are welded by Welding Robots which eliminates human factor.
» All equipment and materials are made in Europe and Quality Certificated.
» Steam Generator Coil Pipes are manufactured in-house by using P235GH Steel Pipes (Certificated, made in Europe).
» ALBA is one of the few European Steam Generator Brands certified with Module H1 Quality System Approval based on 97/23/EC Pressure Equipment Directive.
WORKING PRINCIPLE
| Feed water is pumped to the economizer for pre-heating |
| By using the heating energy of exhaust gas, feed water temperature is increased |
| Hot feed water gets into the coil after preheating. |
| Water starts to get into steam phase during circulation in coil. |
| It is ensured that dry steam is produced via special designed ALBA Vortex Seperator. |
DOWNLOAD
» Feed water is pumped to the economizer for pre-heating